Diagnose
MS- DOS program for BR-3 interface.
07/05/03
Current Version 3.02
Note:
Supports PWM, VPW and ISO 9141.
KWP2000 ( ISO14230 ) is not supported; Use the windows version if you need ISO14230 support.
BR-CAN interfaces are not supported.
This is a Dos program (but may also run in a Dos box under 32 bit versions of Microsoft windows). The computer need not even have a working hard drive if it can boot from a floppy disc and has a serial port that can run at 19,200 baud.
The program communicates with the interface via the serial port. You must have COM1 or COM2 serial port available on your computer.
You can obtain DOS boot floppies at http://www.bootdisk.com If the floppy disc doesnt have enough room, just delete a few utilities from the floppy, such as the Dos editor, etc.
You can also run this program in a simulated mode without an interface or a vehicle to get an Idea of what it does. In this mode, data is generated randomly. The displayed information will not be usefull other than to get an idea of what the program does, and what the display looks like.
There is no installation. Just unzip it to any directory and run it. It MUST be unzipped or it won't function properly. Be sure to look at the readme.txt file for further info. Nothing else is written to your drives, and no INI or Registry files are modified. To Uninstall it, just delete the files that you unzipped.
